Rubio Monocoat USA logo
Rubio Monocoat USA logo

All articles

How to apply WoodCream to rough woodUpdated a year ago

Consult the TDS prior to using WoodCream. 

Materials needed


Application process


  1. Apply in temperatures between 50°F – 80°F. Ensure that the vertical wood is dry and clean.
  2. In case of extremely soiled and oily wood or mildew stains, the wood must be cleaned with a mixture of 10% Exterior Wood Cleaner and water. 


  1. Prepare the surface in order to achieve the desired result (planed, sanded, wire brushed…). 
  2. Remove sanding dust from the surface and wipe dry. 
  3. Stir WoodCream well before applying it.
  4. Mix in WoodCream Softener at a max ratio of 1:1.
  5. Apply the product to the vertical surface with a block brush. Work with the grain in sections approximately 3 to 4 boards wide. It’s best to keep a wet edge. In one motion, use an application brush to perform a final pass, ensuring the WoodCream application is even and consistent. 

Clean up

  • Rinse the brush used to apply WoodCream in water.


For information regarding refreshing your WoodCream finished surfaces, please review WoodCream maintenance. 


To set you up for success, please review the WoodCream tips.

Was this article helpful?