Rubio Monocoat USA logo
Rubio Monocoat USA logo

All articles

How to renovate a WoodCream finished surfaceUpdated a year ago

Consult the TDS prior to using WoodCream. 

Materials needed

Application process


  1. Clean the surface by using water at low pressure and a soft brush; there is no need for sanding.


  1. Stir WoodCream well and dilute it with WoodCream Softener in a ratio from 9 parts  WoodCream and 1 part WoodCream Softener. You can adjust this ratio to max. 1 part WoodCream and 1 part WoodCream Softener to achieve the desired result. 
  2. Apply carefully and evenly to the vertical surface with a block brush suitable for water-beading products. Work with the grain in sections approximately 3 to 4 boards wide. It’s best to keep a wet edge. In one motion, use an application brush to perform a final pass, ensuring the WoodCream application is even and consistent. 

Clean up

  • Rinse the brush used to apply WoodCream in water.


To set you up for success, please review the WoodCream tips.

Was this article helpful?