Rubio Monocoat USA logo
Rubio Monocoat USA logo

All articles

Oil Plus 2C tipsUpdated a year ago

  • Sanding to higher grits closes the grain and reduces the protection offered by the Oil Plus 2C.
  • Oil Plus 2C was formulated to not leave lap lines!
  • When used, remove masking tape carefully and immediate once you have oiled a section, do not leave tape on painted surfaces too long!
  • Do not tape directly to a Rubio Monocoat finished surface.
  • Do not use any cleaners other than Surface Care Spray.
  • Do not apply more oil to a section of the surface than can be managed within about 15 minutes. If the oil gets too sticky during the buffing process, you should do smaller, more manageable sections.
  • If the surface was water-popped, we recommend using a red pad during application to help knock down the grain.
  • Decor, cushions, pillows, and area rugs may be replaced after the surface is fully cured.
  • Furniture may be gently introduced back after 48 hours.
  • Do not use liquids for cleaning the finished surface until fully cured. Only vacuum or dry dust mop the floor during this time.
  • After fully cured, follow the recommended care instructions.
  • Running powerful professional electric machines should only be done by professionals.
Was this article helpful?